Ok this is what we do:
Desolder the Couling capacitor and set it aside for later on .
Look carfully at the trace that connect the capacitor pad to the IC
(the 3.3V supply ) , using a sharp blade cut it completely
Now take a threaded wire and pick only 2 or 3 threads, then tin them out with the soldering iron.
resolder the capacitor , this time it is going to stand up
solder the thin thread from the capacitor top lead into pin number 2
Add some super glue .
now you are ready to go
Here is how to connect to the Arduino mini pro:
Next Page : The USB windows driver
